Pronto Misty Cove

Choose your Hi-Spec visual grade engineering flooring!

Free Local Shipping when you spend over $5000 for a boxed flooring!

Description

Product: Pronto Misty Cove Engineering timber floor

Pronto Misty Cove engineering flooring is manufactured from a sustainable solid European oak 3mm veneer layer and bonded to the 11mm multi-layer plywood substrate. This type of engineering flooring structure provides dimensionally stable and durable timber flooring. This type of flooring is suitable for residential, multi-residential, and commercial properties. It is best suited for the direct stick adhesive installation, but it is also optional for installation as floating floors. Pronto engineering flooring is well suited for people who have various allergies since it does not trap dust as carpets do.

Call JU Flooring for your Pronto engineering flooring project!

For our PRONTO Tongue & Groove engineered planks installed onto Particle Board (PB) or Plywood we provide key points that must be followed to ensure a quality install. Please read the document as a range of important considerations are provided for both Direct Fix and floating installations. Direct Fix is the optimum installation for floor performance, refer to page 3 of the installation manual available under the download option.


For Concrete Slab installation please refer to ATFA Guidelines for adhesion to Concrete Slabs or review the adhesive manufacturer’s guidelines. Concrete Slab substrates must be Dry approx. 2.5 4.5%.

Two methods are discussed, and we encourage you to use professional contractors to ensure the flooring is correctly installed.


All direct fix slab installations require an appropriate Moisture Barrier (MB) system. A system approach with a compatible MB and elastomeric adhesive is required to support warranty provisions. You must follow the adhesive manufacturer’s guidelines for trowel & adhesive spread heights. Substrate flatness is critical; subfloor should not exceed 3 mm over a 3 m radius in all directions. Any hollows or humps need to be assessed and rectified prior to installation. Please follow the manufacturer’s guidelines for leveling compound application and drying times.

Under no circumstances install directly to a joist and bearer system or a timber batten system. The warranty will be void.


T&G planks can be installed for vertical wall features. There are various methods of fixing applicable to this type of application.


Please consult with your contractor to assess the optimum approach as each application will vary from site to site. Generally, a combination of secret nailing along with an elastomeric adhesive will provide a suitable fixing.

Please note: Our structural warranty allows for the installation of PRONTO with Hydronic inslab floor heating only.

We do not provide a warranty for installation with an alternate method of floor heating, this will void your warranty.

 

Please read the full warranty installation document. It is available under the download tab option.

Download

pronto-installation.pdf

Reviews

There are no reviews yet.

Be the first to review “Pronto Misty Cove”

Your email address will not be published. Required fields are marked *

Pronto oak engineering flooring is made from Hi-Spec 3mm visual A/B/C grade oak veneer. If you are after clean, top-notch quality engineering flooring then this is your best choice!

Like with most of the engineering flooring, Pronto oak is also an environmentally friendly timber flooring choice.

Specification

product type

Engineering flooring

brand

Pronto

thickness

14mm

width

190mm

Length

1900mm

Veneer Thickness

3mm

joint system

T&G

grade

ABC HI SPEC

surface

PU Lacquer

hardness

Janka Hardness Rating of 6.6 kN

Edge Finish

Micro-bevel

color variation

black streaking, tiger marks, knots and colour toning.

voc emission

< E1 (Below World Health Organisation Levels)

warranty

25 year limited (lifetime) structural, 20 year limited residential waer, 5 year limited commercial wear

sheen

Matt

surface texture

Light wire brush

slip rating

P3

Joint System

tongue and groove;

grade surface

ABCD European Oak Veneer. Natural Characteristic Brushed, White Washed, Smoked or Stained. 8 Layers of KLUMPP Ultra Matt Lacquered finish.

Slip Rating

In accordance with AS/NZS 4586, P3

Fire Rating

AS/ISO9239.1.Critical Radiant Flux, kW/m2.7.5 kW/m2 Mean Smoke Development, 17 percent minutes.

box contains

2.166sq.m.

get a quote