JU Flooring will supply and install floor screeding for homeowners and builders throughout Sydney. According to the Australian Standards, subfloors underneath the timber floors’ deviation should not be more than 10 mm in any room area or more than 4 mm in any 2 meters length. And, this, is exactly, what concrete floor screeding can achieve. Furthermore, floor screeding is a perfect solution for underfloor heating systems.

It is important to follow the process of screeding installation in a systematic manner:

• check datum,
• check the substrate to make sure is ready to receive the screed
• mix concrete mortar in the correct proportion
• apply screed in sequential order, to avoid dry joints
• apply trowel cuts where necessary

Levelling concrete floors is the process of applying a well-blended mixture of Ordinary Portland Cement with sand and water to a subfloor, in order to form a sturdy and level surface for installation of the finish floor coverings like timber flooring, tiles, carpet, or even vinyl flooring.

Essential steps to get levelling concrete floors right are:

1. Right concrete mix.
2. The right process for installation of the screed.
3. Right measures for screed protection.

After the screed is installed, appropriate floor protection measures must be taken in preventing screeding failures. No site traffic is allowed at least 24-48 hours after the installation of the screed. Heavy loads are not loaded, without permission from the JU flooring project manager.