Simboard OSB sheeting

Unsanded Simboard OSB (Oriented Strand Board) sheeting – is the most used structural board sheeting for timber frame buildings in USA and Europe.

Free Local Shipping when you spend over $5000 for a boxed flooring!

$21.48 / m 2

Out of stock

Description

Unsanded Simboard OSB (Oriented Strand Board) sheeting – is the most used structural board sheeting for timber frame buildings in USA and Europe.

It is made with tongue and groove and has a moisture-repellent ContiFinish surface, therefore it has wide application in the kitchen, bathrooms, and laundry rooms.

Simboard can withstand up to 3 months of general weathering. Although to maintain best-practice is recommended that the boards be fully covered on building sites and where possible avoid exposure to severe conditions such as sun and soaking rain, as this will alter the internal board moisture content.

Excellent technical properties make OSB sheeting the number one material for eco-friendly houses, renovating and refurbishing an existing building, and constructing a new building.

Simboard OSB is made of 100% fresh pinewood from thinnings of PEFC/FSC certified sustainable forests. To glue strands together are used formaldehyde-free binders.

As an example, 18mm thick OSB sheeting can be used for multi-span residential use floor at 600mm joist spacing with flooring 220kg/m2.

OSB vs Particleboard

OSB 15% Less Weight.

OSB density 600kg/m3 while Particleboard 700kg/m3

OSB 18% Lower Thickness.

18mm simboard can be used as a subfloor over the 600mm c/c spaced joists, provided the imposed load is maximum 3kN/m2  uniformly distributed and 2kN concentrated load.

Better R values

Simboard OSB 18mm – 0.13W/m2K

Particle board 19mm – 0.13W/m2K

30% Less Load on a construction

The weight of 18mm OSB is 10.8kg/m2, while 22mm particle board weight 15.4kg/m2

50% More Strength

The bending E-modulus of Simboard OSB is 4930N/mm2, while particleboard has been 3000 to 2500N/mm2

Nail Retention

Is equal or better than MDF and particleboard

Emission

Simboard OSB is manufactured using a formaldehyde-free binder making it better than E1 in emission.

All of these and more factors make OSB sheeting to be the best material to use as a subfloor for residential or commercial buildings.

Contact us for your best offer.

Installation: Screws, nails + glue.

Substrate : Over the joists, concrete, existing timber flooring.

 

Reviews

There are no reviews yet.

Be the first to review “Simboard OSB sheeting”

Your email address will not be published. Required fields are marked *

Specification

product type

Plywood

thickness

18mm

width

900mm

length

3600mm

get a quote